StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Utilization of Electrical Energy - Report Example

Cite this document
Summary
This paper 'Utilization of Electrical Energy' tells that Artificial lighting is currently used all over the world, and its use is predominantly non-homogenous. The most common source of power used in powering artificial lighting is electric power though in some – developed countries…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER94.1% of users find it useful
Utilization of Electrical Energy
Read Text Preview

Extract of sample "Utilization of Electrical Energy"

Utilisation of Electrical Energy Utilisation of Electrical Energy Introduction Artificial lighting is currently used all over the world and its use is predominantly non-homogenous. The most commonly source of power used in powering artificial lighting is the electric power though in some under – developed countries, there is a widespread use of fuel based lighting. The average consumption of electric energy around the world is approximately 19 % of the total electric energy produced. This calls for the specialized improvement in the lighting efficiency to save energy which translates to conservation of the environment. Different environments requires different lighting luminaries. The choice of a specific lighting luminary in a given environment depends on several factors. Some of the factors that influences the choice of lighting luminaires in given environments include; availability of natural light, the intensity of light required, availability of energy sources – in this case electricity – among others. This paper discusses the common discharge luminary in different environments. The chosen environments include; office building, an indoor – 5 –a – side – pitch and Cul-de-sac street lighting Office building For efficiency lighting in an office building, there must be sufficient source of light. This implies that the lighting luminaries used must have a high light intensity. Since the light is always switched on, the luminary must have the capacity to save energy. Considering this factors among others, the best luminary suited for an office building is Fluorescent Lamp. This is the best choice due to the following advantages. Fluorescent lights are cheap Fluorescent lamps generally have a very good luminous efficacy Fluorescent lamps have a very long lamp life (Ranges from 10 000 hours to 16000 hours). This implies less maintenance costs They come in large varieties of CCT and CRI Fluorescent lamp construction, operation and associated circuitry The associated circuitry of fluorescent lamp is shown in figure 1 below Figure 1 showing the associated circuitry of a fluorescent lamp Construction and operation In a fluorescent lamp, light is predominantly produced by fluorescent powders which are activated by Ultra – violet radiation originating from mercury. This type of light source is characterized by low – pressure gas discharge light source. Physically, the lamp is composed of long tubular pipe that contains an electrode on both sides. This tubular pipe is filled with low pressure mercury vapour which is enhanced with inert gas, in this case argon, for starting. The emission of the light occurs in the ultraviolet region. The wavelength of the energy emitted falls in the range of 254 – 185 nanometres. The Ultraviolet radiation produced is then converted into light by the phosphor layer which is coated on the inside of the tube. Most of the initial photon energy, 65 %, is lost by dissipation since one ultraviolet photon produces only one visible photon. Moreover, the final spectral of the light that is distributed can be varied. This is by different combinations of phosphors. The CCT (Correlated Colour Temperature) of fluorescent light varies from 2700 Kelvin to 6500 kelvin. On the other hand, the colour rendering indices varies from 50 to 95. Different fluorescent lamps have different luminous efficacy depending on their construction. The latest fluorescent lamp has a luminous efficacy of 100 lm/W. This excludes the ballast losses. The operation of a fluorescent lamp is as shown in figure 2 below. Figure 2 showing the operation of a fluorescent lamp. Fluorescent lamps have an ever increasing current. This is harmful since it can destroy the lamp (National Industrial Pollution Control Council. Electric and Nuclear Sub-Council, United States. Dept. of Commerce, 1972). Thus to correct this, it is designed in such a way that it limits the lamp current. This is seen in instances where it displays negative voltage to counteract the ever increasing current. In staring and operating a fluorescent lamp, an electronic gear, which incorporates all the equipment, is used. Inspite of the advantages of fluorescent lamp stated above, it has some limitations. This include; Presence of mercury which is considered an environmental hazard Depreciation of light output with age Ambient temperature which affects the light output. The advantages of the lamp supersedes the disadvantages and thus it’s suited to operate efficiently in an office building. An indoor 5-a-side pitch According to the football association (Football Associaton, 2005), the lighting requirements for an indoor 5-a-side pitch is as indicated in the table 1 below Table 1 showing the lighting requirements of an indoor 5-a-side pitch retrieved from Football Associaton. (2005, February). Guide to indoor and outdoor areas for small sided football mini-soccer and futsal. London, London, England. Considering the above stated requirements together with cost, light life among other consideration, Mercury lamps are best suited to perform efficiently in this environment. This is due to the fact that the above stated lighting environment require moderate colour rendering which can be produced by mercury lamps efficiently at low costs. Fluorescent lamp construction, operation and associated circuitry The associated circuitry and construction of fluorescent lamps is as shown in figure 3 below Figure 3 showing the construction of a fluorescent lamp Construction and operation of mercury lamps The heart of the lamp is composed of an arc tube that is fabricated with quartz. Also it is fitted with tungsten electrode which is deposited at both ends. In the tube, mercury vapour is partially filled with argon. Argon is essential since it acts as a buffer in carrying the discharge in the process when the lamp is warming up. This results in the production of heat in vaporizing the mercury thus bringing it into discharge. During operation, production of light is by an electric current that passes through the mercury vapour. An arc discharge that is contained in mercury vapour which is at a pressure of 2 bars produces very strong spectral lines with its visibility visible in wavelengths of between 404 nanometres and 435.8 nanometres. The resultant lamps have a luminous efficacy of 40 – 60 lm/W, and CRI that ranges from 40 to 60. The CCT is 4000 K and the lamp life of mercury lamps is 12000 hours. Cul-de-sac street lighting The lighting luminary in this environment should possess the following characteristics; Should very efficient in that it saves energy Should have a smaller size to allow it fit in several fixture types Should have a better bulb life. Considering this factors among others, the best suited type of luminary to work in such environment is the High pressure Sodium Lamps (HPS lamps). This type of light luminary fulfils the above stated requirements efficiently. Construction and operation of High pressure Sodium Lamps. High Pressure Sodium lamps have a CRI ranging from 20 to 30. It has a lifetime 0f 24000 hours and also, it has 80 – 140 lumens per watt. The use of this type of lamp is suited in municipal lighting, high bay lighting, and outdoor lighting and predominantly in street lighting. In its construction, high pressure Sodium lamp consists of a narrow arc which is supported by a frame. This setting is enclosed in a bulb. The bulb is designed in such a way that it has a very high pressure inside to increase its efficiency. Gaseous forms of sodium, xenon and mercury are used inside the bulb for the purposes of light production. Aluminium oxide is used in making the arc tube. Aluminium oxide is preferred over other compounds since it has the ability to resist corrosion, thus it can withstand the corrosive effect of the sodium presence in the bulb. The lamp is lit by pulse start mechanism. In this mechanisms, a built in igniter which is built into the ballast initiates and sends a pulse of high voltage via the arc tube. This pulse results into production of an arc through the xenon gas. As the xenon lights, the lamp turns sky blue. The flow of the current results the arc heating up and consequently, mercury vapour lights and this gives the lamp a bluish colour. As the lamp heats, other material vaporizes and sodium is the last material to vaporize. As the sodium vapour vaporizes, it strikes an arc over 240 C. To create a more white light, the sodium compound is mixed with other impurities. Besides facilitating the lighting of the lamp, the mercury presents helps in blue spectrum light into the sodium light which is purely yellow. The challenge of the lamp is maintaining the vacuum inside. Oxygen together with other gases such as nitrogen should be prevented from entering the in. To facilitate this, the gutter is used to keep the vacuum stable by introducing a mechanisms in which oxygen and other unwanted gases are sucked out. The amalgam reservoirs at the ends of the of the arc tube store the sodium. The diagram below shows the electronic ballast circuit for High pressure sodium lamp. Figure 4 showing the electronic ballast circuit for High pressure sodium lamp Task 2 Figure 5 showing the lighting scheme and luminary layout The lighting system is very efficient since the luminaires used have a high efficacy and high luminous intensity. References Football Associaton. (2005, February). Guide to indoor and outdoor areas for small sided football mini-soccer and futsal. London, London, England. National Industrial Pollution Control Council. Electric and Nuclear Sub-Council, United States. Dept. of Commerce. (1972). Fluorescent lamps: the environmental compatiblity of fluorescent and other mercury-containing lamps; sub-council report. NIPCC. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Utilization of Electrical Energy Report Example | Topics and Well Written Essays - 2500 words - 1, n.d.)
Utilization of Electrical Energy Report Example | Topics and Well Written Essays - 2500 words - 1. https://studentshare.org/physics/1802879-utilisation-of-electrical-energy
(Utilization of Electrical Energy Report Example | Topics and Well Written Essays - 2500 Words - 1)
Utilization of Electrical Energy Report Example | Topics and Well Written Essays - 2500 Words - 1. https://studentshare.org/physics/1802879-utilisation-of-electrical-energy.
“Utilization of Electrical Energy Report Example | Topics and Well Written Essays - 2500 Words - 1”. https://studentshare.org/physics/1802879-utilisation-of-electrical-energy.
  • Cited: 0 times

CHECK THESE SAMPLES OF Utilization of Electrical Energy

North Street Primary School Upgrade Proposal

On the other hand, the utilization of the fossil fuel and electricity based temperature controlled system also consumes a major portion of the electrical energy increasing the number of carbon footprints.... In general conditions, the thermal energy is provided by electrical energy or burning natural gas or oil, which is responsible for the increase in the carbon footprints(Burberry, 1997, p17-73).... The utilization of artificial lights in the presence of natural light makes the structure to be less friendly to the environment and thus contribute in emitting greenhouse emissions and harm the structure economically by increasing the energy bill for the structure....
4 Pages (1000 words) Essay

Energy Source for the near Future

And the federal administration could give the necessary manpower and financial support for the augmentation of energy technologies or its promotion aimed towards the lesser utilization of electricity distributed in the common pool or from the conventional fossil fuel sources.... In the essay “energy Choice” the author answers the question: What is an attractive option as an energy source for the near future in the United States?... The energy development in the past has been linked directly to the market demand which was proven very successful in the past....
2 Pages (500 words) Assignment

Complex Systems and Decision Making

In the paper “Complex Systems and Decision Making,” the author discusses the technology, which allows the industries to enhance the utilization of existing transmission, generation reserves as well as power system performance; through a system that is more flexible, one increases stability margins.... hellip; This study aims to explore the use of HVDC and FACTS controllers to stabilize electrical power security in the power network.... The investigation will employ a highly controlled experimental design to examine the use of both the HVDC and FACTS controllers in enhancing and/or stabilizing as well as strengthening the electrical power security in a power network....
3 Pages (750 words) Assignment

The Design of Lighting Systems, Electrical Energy Management and Tariffs

Thus such resources should be used which consumes less energy.... Distribution should be in a way that the generated energy should be supplied to maximum number of consumers.... This is done when the consumption is less and proper and no wastage of energy is there.... While designing an electrical circuitry for any house, building, hospitals, factory it is kept in mind that cost should be less and purpose should be fulfilled....
9 Pages (2250 words) Essay

North Street Primary School Upgrade Proposal

On the other hand, the utilization of the fossil fuel and electricity based temperature controlled system also consumes a major portion of the electrical energy increasing the number of carbon footprints.... However, old structures can be modified to consume less energy as compared to that of the similar structures.... The building of the school is an old patterned building that utilizes the immense amount of energy for all the systems.... North Street Junior School is facing the similar problem thus it needs few amendments to cure the problems related to the greenhouse emission and the energy consumption....
4 Pages (1000 words) Essay

Utilisation - Elecrical engineering

This is due to the fact that this type of lamp produces less heat and uses less energy and thus it conserves energy while at the same time producing enough lighting.... Mostly, utilisation factor and light loss factor are considered.... Other factors considered include efficacy, colour temperature, and cost....
4 Pages (1000 words) Assignment

Green & Competitive Qs

Through this initiative, the General Electrical Company emphasized on clean technology whereby, the company encouraged utilization of solar energy, fuel cells, low engine fuel consumption capacity, as well as application of clean technology to curb environmental pollution (Wittenberg, Russell, Lipsky & Enterprise Sustainability Action Team, 2009).... General Electric (GE) company is one of the American largest conglomerate corporations that operate under the five major segments namely; energy, industrial, technological infrastructure, consumer and finance segment....
2 Pages (500 words) Assignment

Unit 43 distinction

electrical energy can be used to heat equipments to produce heat as well as running the air conditioner machines to bring in cold air3.... nergy efficient devices will enhance less utilization of the available energy thus saving a lot of energies that can be exported.... The quest to make changes in the way energy is being used and supplied in the entire world pose a greatest challenge to all the engineers in pushing towards sustainability.... There are several patterns of energy that exist, but none of them has proved to be much efficient, thus… The equipments that are made should reduce the energy in use but maintain both the individual and industrial activities that are in progress....
1 Pages (250 words) Coursework
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us