StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Digital electronics logic gates - Lab Report Example

Cite this document
Summary
In this lab activity, the purpose was to use the NOR and NAND gates to implement several basic logic gates, and use the pulse waveforms to test XOR and OR gates. Additionally, the experiments aimed at using the XOR and OR gates to setup a circuit that implements 1’s and 2’s…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER93% of users find it useful
Digital electronics logic gates
Read Text Preview

Extract of sample "Digital electronics logic gates"

Digital Electronic Logic Gates – Lab Report Objective In this lab activity, the purpose was to use the NOR and NAND gates to implement several basic logic gates, and use the pulse waveforms to test XOR and OR gates. Additionally, the experiments aimed at using the XOR and OR gates to setup a circuit that implements 1’s and 2’s complement of a 4-bit binary number. We used two ICs to determine whether an IC had a NOR< NAMD, XOR or OR gates so that we could know exactly where the outputs and inputs of the ICs were.

The NAND and NOR gate was first utilized to implement the other basic logic gates and then the XOR and OR gates were tested using the pulse waveforms. The same gates were again used to setup circuits that performed the 1’s and 2’ complements of a 4-bit binary.Equipment In order to successfully carry out these experiments, certain lab apparatus were used:7432, 7400, and 7402 ICsConnection wires Signal generatorOscilloscopeTrainer boardThe first experiment required that we find, from the manufacturer’s data sheet, the pin configuration or connection diagram for the 7402 and 7400 quad 2-inputs NOR and 2- inputs NAND gates ICs respectively, and then apply Vcc and ground to the correct pins.

We found out that the ground is applied in pin7 and Vcc in pin 14. We then went ahead and setup the circuit as indicated in Figure 1 and Figure 2. Figure 1 is a NAND gate and thus the IC we chose to use is the 7400 IC; on the other hand, Figure is a NOR gate and thus the 7402 IC was used (Kumar 689). Figure 1Figure 2After connecting the input to a 0 and a 1, we recorded each output and produced the truth tables indicated below, Table 1 and Table 2. Given these circuit configurations only had one input and one output, the circuits implemented produced the following truth tables.

AX0110 Table 1 Table 2Work CitedKumar, A. Anand. Fundamentals of Digital Circuits. New Delhi: Tata Mc Graw-Hill, 2009. Print.

Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Digital electronics logic gates Lab Report Example | Topics and Well Written Essays - 250 words”, n.d.)
Digital electronics logic gates Lab Report Example | Topics and Well Written Essays - 250 words. Retrieved from https://studentshare.org/systems-science/1659742-digital-electronics-logic-gates
(Digital Electronics Logic Gates Lab Report Example | Topics and Well Written Essays - 250 Words)
Digital Electronics Logic Gates Lab Report Example | Topics and Well Written Essays - 250 Words. https://studentshare.org/systems-science/1659742-digital-electronics-logic-gates.
“Digital Electronics Logic Gates Lab Report Example | Topics and Well Written Essays - 250 Words”, n.d. https://studentshare.org/systems-science/1659742-digital-electronics-logic-gates.
  • Cited: 0 times

CHECK THESE SAMPLES OF Digital electronics logic gates

Logic gates characteristics

PRACTICAL 5: LOGIC DECODING CIRCUITS AND MULTIPLEXERS Name of Student: Course: Instructor: Introduction logic gates are the basic building blocks of digital electronics.... It is a combination of logic gates thereby having several inputs with only one output.... They are used to reduce the number of logic gates required to implement the circuit.... In the TTL family of digital electronics, voltages in the range of 0 – 0.... Most logic operations are implemented using AND and OR gates....
5 Pages (1250 words) Lab Report

Electrical Systems, Microprocessors

Using the smallest possible number of gates simplifies the map and makes its readability much efficient.... arnaugh charts or K maps as referred to by some are a way of deriving and simplifying most Boolean expressions for logic reasoning or functions from a truth table (Jain 2010).... The paper "Electrical Systems, Microprocessors" highlights that digital circuits consume more energy than compared analog circuits in accomplishing the same job, thus producing a lot of heat which upsurges the complexity of the circuit like heat sinks inclusion....
6 Pages (1500 words) Article

EAT117 Electronic Principles

"EAT117 Electronic Principles" paper states that an improvement occurred to RTL to form Direct-Coupled Transistor logic.... Close to RTL is Transistor-transistor logic, TTL.... Its transistor conducts both functions of amplification and logic gating.... The early logic systems required knowledge of reasoning to operate.... The first practical application of logic systems was expert systems.... There were also many limitations of expert systems on logic....
9 Pages (2250 words) Assignment

Basic Elements and Attributes that Relate to Logic Circuits

The next section discusses logic gates starting with the three most basic gates followed by combinational logic gates.... The report contains illustrations and truth tables ensuring a vivid illustration of the application of logic gates in logic circuits and their relationship with logic operations.... Several digital features characterize the design of logic circuits, these include; Boolean expressions and algebra, logic gates, and the simplification or enhancement of the logic circuit using various yogic techniques such as Karnaugh maps....
18 Pages (4500 words) Coursework

The Basic Elements and Attributes that Relate to Logic Circuits

Logic circuits contain gates and transmission wires which carry input digital signals and emit a single output digital signal.... "The Basic Elements and Attributes that Relate to logic Circuits" paper offers an insightful introduction regarding logic circuits featuring a detailed description of logic circuits and then proceeds to outline various electrical and electronic issues that relate to their design and implementation....
15 Pages (3750 words) Coursework

The Resistors and Logic Circuits

They are built using gates that consist of one output and one or more inputs.... This paper ''The Resistors and logic Circuits '' tells that primary experiment objective is to study the flow of current and voltage drops in different circuit connections and fundamental logic circuits' operation.... iodes were used to simulate the logic circuits of AND and OR, and the circuit operation on biasing the diodes iteratively was consistent with the theoretical expectation....
7 Pages (1750 words) Lab Report

Digital Logic Design Principles

logic gates have been defined as elementary building blocks that take in one or more electronic signals from a circuit and sends an output signal based on that output.... The common logic gates come with two inputs and one output.... The logic gates are placed in a way that enables them to determine how data is physically processed in a computer.... The zeros and ones will then be interpreted by the device of the receiver and then converted back to a language that can be understood by the Requirements of logic gates....
20 Pages (5000 words) Research Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us