StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Mechanical testing of metals and polymers - Assignment Example

Cite this document
Summary
MECHANICAL TESTING OF METALS AND POLYMERS By (name) Subject Instructor Institution Date 1. Introduction The procedure of various engineering properties which include polymers and ferrous metal is contained in this lab report. Steel with a carbon content of that range from 0.1 percent to 0.85 percent is the ferrous metal, and the polymers included the PVC and polypropylene that were under investigation in this experiment…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER93.2% of users find it useful
Mechanical testing of metals and polymers
Read Text Preview

Extract of sample "Mechanical testing of metals and polymers"

Download file to see previous pages

2. Procedure: Test Equipment Material Tested Test Speed mm/min Secant Tensile Strength-Metal Universal Tensile Testing machine 0.1% C Steel 0.4%C Steel 0.8%C Steel 1.15%C Steel 50 Tensile Strength-Plastics Universal Tensile Testing machine HDPE,PP-PE, PVC, PC, Acetal (POM), Nylon (PA66), GRN (PA66+glass fibres) 10, 50 & 500 Pendulum Impact Tests Zwick/Roell Pendulum Impact Tester PVC, POLYCARBONATE, NYLON 66, HDPE, ACETAL 7.5J Force Vickers hardness Test Vickers Testing Machine 0.1% C Steel 0.

2%C Steel 0.4%C Steel 0.85%C Steel 20 Kg load for (2) minutes 3. Results Red 0.1% C Steel Green 0.4%C Steel Blue 0.8%C Steel Orange 1.15%C Steel Fmax Fmax dL at Fmax FBreak dL at break Nr N/mm? N mm N mm 1 414.53 8302.90 6.4 2020 10.7 2 691.64 13853.22 4.9 3930 8.1 3 896.10 17948.63 4.3 6720 5.6 4 1108.75 11098.39 2.7 4030 3.4 dL = Strain Hardness of carbon steels (load 20Kg) 1st measurement 2nd measurement 3rd measurement 0.1% Carbon 146 148 153 0.2% Carbon 166 162 170 0.4% Carbon 209 213 217 0.

85% Carbon 255 259 251 Zwick/Roell Pendulum Impact Tester. 1-Jun-15 M/c Model No 5113. Ref No A466690. . 1.55 20.62 32.98 Charpy 7.50 “ 6 15.44 2.97 45.86 0.45 6.03 9.86 Charpy 7.50 Series Specimen width b0 Specimen thickness a0 Cross-section Impact energy Impact energy Impact resistance Work contents n = 5 mm mm mm? J % kJ/m? J x 15.82 2.978 47.11 0.38 5.05 8.03 7.50 s 0.3013 0.01304 1.074 0.09 1.16 1.80 0.00 ? 1.90 0.44 2.28 22.89 22.89 22.44 0.00 Zwick/Roell Pendulum Impact Tester. 1-Jun-15 M/c Model No 5113.

Ref No A466690. Force 7.5J Material: POLYCARBONATE Specimen width b0 Specimen thickness a0 Cross-section Impact energy Impact energy Impact resistance Type of test, PIT Work contents Legends Nr mm mm mm? J % kJ/m? J “ 1 15.82 3.11 49.2 2.29 30.50 46.49 Charpy 7.50 “ 2 15.5 3.12 48.36 2.39 31.93 49.52 Charpy 7.50 “ 3 16.01 3.11 49.79 2.44 32.55 49.03 Charpy 7.50 “ 4 15.99 3.12 49.89 2.23 29.69 44.63 Charpy 7.50 “ 5 15.39 3.16 48.63 2.28 30.40 46.88 Charpy 7.50 “ 6 15.81 3.09 48.85 2.47 32.96 50.

60 Charpy 7.50 Series Specimen width b0 Specimen thickness a0 Cross-section Impact energy Impact energy Impact resistance Work contents n = 6 mm mm mm? J % kJ/m? J x 15.75 3.118 49.12 2.35 31.34 47.86 7.50 s 0.2552 0.02317 0.622 0.10 1.32 2.23 0.00 ? 1.62 0.74 1.27 4.22 4.22 4.66 0.00 Zwick/Roell Pendulum Impact Tester . 1-Jun-15 M/c Model No 5113. Ref No A466690. Force 7.5J Material: NYLON 66 Specimen width b0 Specimen thickness a0 Cross-section Impact energy Impact energy Impact resistance Type of test, PIT Work contents Legends Nr mm mm mm? J % kJ/m? J “ 1 15.35 3.19 48.97 3.61 48.18 73.80 Charpy 7.

50 “ 2 16.1 3.19 51.36 4.88 65.02 94.95 Charpy 7.50 “ 3 16.05 3.22 51.68 4.64 61.83 89.73 Charpy 7.50 “ 4 16.1 3.2 51.52 4.50 60.05 87.42 Charpy 7.50 “ 5 16 3.18 50.88 4.66 62.14 91.60 Charpy 7.50 “ 6 15.98 3.2 51.14 4.07 54.32 79.67 Charpy 7.50

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Mechanical testing of metals and polymers Assignment - 1”, n.d.)
Mechanical testing of metals and polymers Assignment - 1. Retrieved from https://studentshare.org/engineering-and-construction/1465173-mechanical-testing-of-metals-and-polymers
(Mechanical Testing of Metals and Polymers Assignment - 1)
Mechanical Testing of Metals and Polymers Assignment - 1. https://studentshare.org/engineering-and-construction/1465173-mechanical-testing-of-metals-and-polymers.
“Mechanical Testing of Metals and Polymers Assignment - 1”, n.d. https://studentshare.org/engineering-and-construction/1465173-mechanical-testing-of-metals-and-polymers.
  • Cited: 0 times

CHECK THESE SAMPLES OF Mechanical testing of metals and polymers

Polymer Organic Light Emitting Diode Materials and Techniques

The study that was conducted is about the one of the most important technology in optics and optical engineering.... This is the light technology that uses semi-conducting diodes referred to as LEDs or light-emitting diodes.... The main focus is one of the types of LEDs which is the polymer organic light-emitting diode (POLED) or the polymer light-emitting diode (PLED). … The objective of the research was achieved through the assimilation of the published reports and developments on the topic covered by the period starting from the year 1998 to the present year....
23 Pages (5750 words) Essay

Development of an Impact Drop Test Machine

It is typically used to check the toughness of metals, but comparable tests are used for polymers, ceramics as well as composites.... It is typically used to test the toughness of metals.... Similar tests can be used for ceramics, polymers, as well as composites....
21 Pages (5250 words) Essay

Reinforcement of Dental Composites by Electrospun Nanofibers

By designing composites of polyacrylate resin matrices modified with commercial dendritic polymers, like polyesteramide and polyester, we need to create a variation from the previous investigations by incorporating electrospun polyamide nanofibers into the system and test their effect on the overall mechanical strength of these composites.... EXECUTIVE SUMMARY: The nanofibers will be synthesized by electrospinning three different polymers that are Poly Vinyl Alcohol (PVOH), Poly-L-Lactide Acid (PLLA) and Nylon 6 (Polycaprolactam or Polyamide or PA6) and they are to be used with the Hybrane modified acrylate resin matrix of the composites at different weight percents and particle diameters....
13 Pages (3250 words) Research Proposal

Polymer Organic Light Emitting Diode Materials and Techniques

The study “Polymer Organic Light Emitting Diode Materials and Techniques”  illustrates the importance of the development of the LED technology that is applied in flat- and LCD panel displays and is suggested to be used in experiments with the Small Molecule and the Coagulated Polymer in future....
19 Pages (4750 words) Research Paper

Reinforcement of Dental Composites by Electrospun Nanofibers

hellip; The nanofibers will be synthesized by electrospinning three different polymers that are Poly Vinyl Alcohol (PVOH), Poly-L-Lactide Acid (PLLA) and Nylon 6 (Polycaprolactam or Polyamide or PA6) and they are to be used with the Hybrane modified acrylate resin matrix of the composites at different weight percents and particle diameters.... In the following investigation, we attempt to understand and interpret the reasons associated with mimicking such kind of mechanical strength and structured toughness after reinforcing the resinous polyacrylate matrices of the dental composites with hyperbranched polymeric nanofibers....
14 Pages (3500 words) Research Paper

Production of Biodegradable Polymers

This research paper “Production of Biodegradable polymers” considers the production of biodegradable polymers.... In examining the production processes it considers the purpose and historical nature of both degradable and non-degradable polymers production.... hellip; The author explains that polymers are made from petroleum and natural gas to provide the world with infinite uses from the very simple, such as food storage containers, to the very complex, as in artificial limbs....
34 Pages (8500 words) Research Paper

Proton Exchange Membrane Materials for Fuel Cells

This annotated bibliography "Proton Exchange Membrane Materials for Fuel Cells" evaluates the development of Proton Exchange Membrane Fuel Cells or Polymer Electrolyte Membrane Fuel Cells, including the challenges such as the high cost of technology and polymer treatment.... nbsp;… This paper evaluates the various research studies' recent advances and challenges regarding the commercial development of PEMFC....
13 Pages (3250 words) Annotated Bibliography

Carbon Fibre Reinforced Polymers

"Carbon Fibre Reinforced polymers" paper focuses on the carbon fibers that have a high elastic modulus and a high tensile strength.... nbsp;… Carbon Fiber reinforced polymers require detailed processing which consumes time and is also very costly.... Some automotive manufacturers like Ferrari prefer the use of Aluminium to Carbon fiber reinforced polymers (CFRP).... nbsp; Carbon fiber reinforced polymers have acquired used in the aerospace industry because their strength to weight ratio is among the highest of the fiber-reinforced polymers....
5 Pages (1250 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us